New Product: ICON 2007-21 Toyota Tundra 2.5 EXP Front Coilover Shocks & Packages
ICON Vehicle Dynamics is excited to announce 2.5 EXP Series Front Coilover Shocks for 2007-2021 Toyota Tundra, along with Stages 1 through 3 of our EXP Suspension Systems. EXP Series Shocks combine the performance of a fully rebuildable 2.5-inch diameter premium shock absorber with built-in lift height of 0 to 2.25 inches and the convenience and cost-benefits of re-using the Tundra’s factory coil spring. EXP bridges the gap between spacer lifts and threaded bodied coilovers, providing suspension lift, custom-tuned performance and maximum travel, all in an economical package. In addition to the 2.5 EXP Shocks for 07-21 Tundra, ICON is also introducing Stages 1 to 3 of our EXP Suspension Systems for 07-21 Tundra. ICON's famous "Stage" suspension systems assist 4X4 owners in selecting and configuring the perfect suspension system to meet their expectations and budget. 07-21 TUNDRA 2.5 EXP FRONT COILOVER SHOCK EXP Series is based on ICON’s proven 2.5-inch diameter Aluminum Series shock absorber, featuring a one-piece impact-extruded aluminum shock body. Hard anodizing provides a great-looking, consistent finish with superior resistance to abrasion and corrosion. The massive 7/8-inch diameter shaft is induction hardened and chrome plated. EXP shocks use the factory shaft-up orientation. The 6061-billet aluminum coil spring seat is CNC machined to fit the Tundra’s OE coil springs. A series of snap-ring grooves machined into the shock body provide easily-selectable front-end ride height adjustment from 0" to 2.25” of lift over stock. EXP Series shocks utilize a one-piece digressive piston design and are custom tuned for the Tundra in conjunction with their stock front coil springs to maximize damping performance and provide unsurpassed ride quality, on and off-road. The increased piston size and shock oil volume provided by the 2.5-inch diameter aluminum body also provide superior heat dissipation compared to the smaller, steel bodied OE shocks, resulting in longer-lasting shock performance over prolonged use at higher speeds and through rougher terrain. For those who would like to further tune their suspension, EXP shocks are fully re-valvable (and rebuildable) by any qualified shock technician, with parts available from ICON. KEY FEATURES: Vehicle specific design for 2007-21 Toyota Tundra Vehicle specific tuned for superior shock damping and control 2.5 Aluminum Series Shock with Internal Reservoir Adjustable ride heights from 0-2.25” of front lift over stock with the use of snap ring Utilizes factory coil spring Inverted shaft up design featuring 7/8” diameter, induction hardened, chrome plated shaft Impact extruded, hard anodized aluminum cylinder offer excellent corrosion resistance and consistent finish CNC machined 6061 aluminum components with a black anodized finish PTFE lined spherical bearing for extended longevity and minimal deflection Fully rebuildable and re-tunable Shop ICON Tundra Front EXP Coilover Shock 07-21 TUNDRA STAGE 1 EXP SUSPENSION SYSTEM Our Stage 1 EXP system bundles a pair of 2.5 EXP Front Coilover Shocks and a pair of our 2.0 VS Series rear shocks to give your 07-21 Toyota Tundra improved damping performance and either stock height or 2.25" of front lift (does not lift rear). 58655 (2) 07-21 TUNDRA FRONT 2.5 EXP COILOVER 56506 (2) 07-21 TUNDRA 0-1.5" REAR 2.0 VS IR Shop ICON Tundra EXP System, Stage 1 07-21 TUNDRA STAGE 2 EXP SUSPENSION SYSTEM Stage 2 EXP includes everything from Stage 1 and adds ICON's rear leaf spring pack expansion kit to add lift and performance to rear while using the selectable 2.25" height for the front EXPs. 58655 (2) 07-21 TUNDRA FRONT 2.5 EXP COILOVER 51200 (1) 07-21 TUNDRA REAR EXPANSION PACK KIT 56506 (2) 07-21 TUNDRA 0-1.5" REAR 2.0 VS IR Shop ICON Tundra EXP System, Stage 2 07-21 TUNDRA STAGE 3 EXP SUSPENSION SYSTEM Stage 3 EXP builds on the Stage 2 package by adding remote reservoirs to the 2.0 versus rear shocks for increased shock oil volume and better heat dissipation, providing improved performance at higher speeds and more aggressive suspension cycling. 58655 (2) 07-21 TUNDRA FRONT 2.5 EXP COILOVER 51200 (1) 07-21 TUNDRA REAR EXPANSION PACK KIT 56506R (2) 07-21 TUNDRA 0-1.5" REAR 2.0 VS RR Shop ICON Tundra EXP System, Stage 3
New Product: ICON 2021-Up Ford Bronco Impact Trail Series Front Bumper
ICON Vehicle Dynamics is excited to announce the next addition to our Impact Armor product line for 2021 & newer Ford Bronco, the Trail Series Front Bumper. ICON Impact products follow our design philosophy of high clearance, high strength and attention to detail. The Trail Series Front Bumper is perfect for those who want to add a rugged, all steel, high clearance off-road bumper to their Bronco but do not need to run a winch. There is an optional center mesh insert that provides for relocating the Adaptive Cruise Control module on so-equipped Broncos. 45203 21-UP FORD BRONCO TRAIL SERIES FRONT BUMPER 45210 21-UP FORD BRONCO ACC RELOCATION KIT FOR TRAIL SERIES FRONT BUMPER Keep reading for detailed information on each of these exciting new ICON Impact products for Bronco! ICON IMPACT TRAIL SERIES FRONT BUMPER 45203 21-UP FORD BRONCO TRAIL SERIES FRONT BUMPER Tackle the toughest trails with the Trail Series Front Bumper from ICON! Designed for the ultimate in off-road form and function, Trail Series features a multi-faceted, high-clearance design that sneaks past the tightest rocks. Tapered ends protect the Bronco's lower grille corners while allowing the front tires maximum access to grip and pull the vehicle over steep obstacles. If you do manage to get yourself into a tight spot, recovery is aided by a pair of extreme duty recovery shackle tabs, CNC machined from beefy 1" thick plate steel. The bumper comes with provisions to retain the Bronco's parking sensors (caps are provided for Broncos without sensors). A removable aluminum mesh panel promotes airflow through the Bronco's intercooler. The bumper is fabricated from CNC laser cut, precision brake-formed 3/16 plate steel. The bumper looks as great as it performs, with a durable, semi-gloss black powder coat finish. KEY FEATURES: Design provides sporty, light weight and maximum clearance on the trail Faceted, high-clearance design to maximize approach angle and off-road performance Parking sensor mounts with bezels or caps for Broncos without sensors Extreme duty 1" thick recovery shackle tabs are angled for high clearance 3/16" thick plate steel construction, CNC laser cut and brake-formed Removable Aluminum mesh panels allow maximum airflow to intercooler Up to five (5) 3" LED cube lights or a 20" LED light bar (not included) may be mounted behind the center mesh panel using the provided mounting tabs Optional ACC Relocation Kit (p/n 45210, sold separately) allows continued functionality of the ACC module (note: reduces LED cube light mounting locations from 5 to 4; 20" light bar not compatible) Easy bolt-on installation with no cutting or drilling Durable satin black powder coat finish ICON Impact Series Limited Lifetime Warranty shop ICON bronco trail series bumper OPTIONAL: ACC RELOCATION KIT 45210 21-UP FORD BRONCO ACC RELOCATION KIT FOR TRAIL SERIES FRONT BUMPER For those running the ICON Impact Trail Series front bumper on Broncos equipped with Adaptive Cruise Control, this replacement for the bumper's front mesh panel allows positioning the ACC module where it will still be fully functional. With the ACC module relocated by this item, up to four (4) 3" LED cube lights may still be installed in the bumper's center light array mounts, as the ACC occupies the fifth (center) position. KEY FEATURES: Relocates ACC module for use with the ICON Impact Trail Series Front Bumper Retains Adaptive Cruise Control functionality 2mm Aluminum CNC laser cut construction Durable textured black powder coat finish Stainless steel hardware included ICON Impact Series Limited Lifetime Warranty NOTE: Reduces Trail Series Front Bumper's LED cube light mounting locations from 5 to 4; 20" light bar not compatible Shop ICON Bronco ACC Relocation Kit
New Product: ICON 2021-Up Ford Bronco Suspension Systems
The 2021-up Ford Bronco has quickly become the hottest off-road vehicle around, and ICON Vehicle Dynamics has been at the forefront of engineering suspension systems and components to squeeze every ounce of performance out of this exciting platform. Now, ICON rounds out it's full line of complete Suspension System "Stages" with the addition of entry level suspension performance packages featuring the popular new 2.5 EXP coilover shock. EXP Series shock absorbers combine the performance of a fully rebuildable 2.5-inch diameter premium shock with the convenience and cost-benefits of re-using the Bronco’s factory coil spring and other components. EXP bridges the gap between spacer lifts and threaded bodied coilovers, providing suspension lift, custom-tuned performance and maximum travel, all in an economical package. Stage 1 and Stage 2 ICON Suspension Systems for 2021-up For Bronco feature the 2.5 EXP shock. Stage 1 includes EXP's for all four corners of the vehicle, in a simple kit that is suitable for vehicle owners staying at the lower end of the EXP shock's height adjustability. Stage 2 adds either billet or tubular Upper Control Arms, which are key for maintaining proper front end alignment on Broncos where the EXP shocks' taller lift height selection is used. IMPORTANT: please note that Stage 1 and Stage 2 systems (and the EXP shocks they include) are specific for either the OE HOSS 1.0 or HOSS 2.0 suspension systems. K40001 21-UP BRONCO HOSS 1.0 PKG 1.5-3" LIFT STAGE 1 SUSPENSION SYSTEM K40002T 21-UP BRONCO HOSS 1.0 PKG 1.5-3" LIFT STAGE 2 SUSPENSION SYSTEM TUBULAR K40002 21-UP BRONCO HOSS 1.0 PKG 1.5-3" LIFT STAGE 2 SUSPENSION SYSTEM BILLET K40011 21-UP BRONCO HOSS 2.0 PKG 0-3" LIFT STAGE 1 SUSPENSION SYSTEM K40012T 21-UP BRONCO HOSS 2.0 PKG 0-3" LIFT LIFT STAGE 2 SUSPENSION SYSTEM TUBULAR K40012 21-UP BRONCO HOSS 2.0 PKG 0-3" LIFT LIFT STAGE 2 SUSPENSION SYSTEM BILLET Keep reading for detailed information on each of these exciting new ICON Impact products for Bronco! STAGE 1 - HOSS 1.0 ICON's Stage 1 Complete Suspension System for 21-Up Ford Bronco includes front and rear EXP shocks only. As the EXP shock allows for user-selectable lift-height, Stage 1 is suitable for those Bronco owners who will be using the lowest of the available height setting, which is suitable for use with the Bronco's OE upper control arms. K40001 21-UP BRONCO HOSS 1.0 PKG 1.5-3" LIFT STAGE 1 SUSPENSION SYSTEM 48601 (2) 21-UP BRONCO HOSS 1.0 PKG 2.5 FRONT EXP COILOVER 48611 (2) 21-UP BRONCO HOSS 1.0 PKG 2.5 REAR EXP COILOVER Shop ICON Hoss 1.0 Package, Stage 1 STAGE 2 - HOSS 1.0 ICON's Stage 2 Complete Suspension System for 21-Up Ford Bronco includes front and rear EXP shocks as well as your choice of either tubular or billet Upper Control Arms. As the EXP shock allows for user-selectable lift-height, Stage 2 is suitable for those Bronco owners who will be using the higher of the available lift height settings, where the ICON UCA's will be beneficial in correcting front end alignment. K40002T 21-UP BRONCO HOSS 1.0 PKG 1.5-3" LIFT STAGE 2 SUSPENSION SYSTEM TUBULAR 48601 (2) 21-UP BRONCO HOSS 1.0 PKG 2.5 FRONT EXP COILOVER 48400DJ (1) 21-UP BRONCO TUBULAR UCA DJ PRO KIT 48611 (2) 21-UP BRONCO HOSS 1.0 PKG 2.5 REAR EXP COILOVER Shop ICON Hoss 1.0 Package, Stage 2 Tubular K40002 21-UP BRONCO HOSS 1.0 PKG 1.5-3" LIFT STAGE 2 SUSPENSION SYSTEM BILLET 48601 (2) 21-UP BRONCO HOSS 1.0 PKG 2.5 FRONT EXP COILOVER 48500DJ (1) 21-UP BRONCO BILLET UCA DJ PRO KIT 48611 (2) 21-UP BRONCO HOSS 1.0 PKG 2.5 REAR EXP COILOVER Shop icon hoss 1.0 package, stage 2 billet STAGE 1 - HOSS 2.0 ICON's Stage 1 Complete Suspension System for 21-Up Ford Bronco includes front and rear EXP shocks only. As the EXP shock allows for user-selectable lift-height, Stage 1 is suitable for those Bronco owners who will be using the lowest of the available height setting, which is suitable for use with the Bronco's OE upper control arms. K40011 21-UP BRONCO SASQUATCH 2-3" LIFT STAGE 1 SUSPENSION SYSTEM 48602 (2) 21-UP BRONCO HOSS 2.0 PKG 2.5 FRONT EXP COILOVER 48612 (2) 21-UP BRONCO HOSS 2.0 PKG 2.5 REAR EXP COILOVER Shop ICON Hoss 2.0 Package, Stage 1 STAGE 2 - HOSS 2.0 ICON's Stage 2 Complete Suspension System for 21-Up Ford Bronco includes front and rear EXP shocks as well as your choice of either tubular or billet Upper Control Arms. As the EXP shock allows for user-selectable lift-height, Stage 2 is suitable for those Bronco owners who will be using the higher of the available lift height settings, where the ICON UCA's will be beneficial in correcting front end alignment. K40012T 21-UP BRONCO HOSS 2.0 STAGE 2 SUSPENSION SYSTEM 2-3" LIFT - TUBULAR UCA 48602 (2) 21-UP BRONCO HOSS 2.0 PKG 2.5 FRONT EXP COILOVER 48400DJ (1) 21-UP BRONCO TUBULAR UCA DJ PRO KIT 48612 (2) 21-UP BRONCO HOSS 2.0 PKG 2.5 REAR EXP COILOVER Shop icon hoss 2.0 package, stage 2 tubular K40012 21-UP BRONCO HOSS 2.0 STAGE 2 SUSPENSION SYSTEM 2-3" LIFT - BILLET UCA 48602 (2) 21-UP BRONCO HOSS 2.0 PKG 2.5 FRONT EXP COILOVER 48500DJ (1) 21-UP BRONCO TUBULAR UCA DJ PRO KIT 48612 (2) 21-UP BRONCO HOSS 2.0 PKG 2.5 REAR EXP COILOVER Shop icon hoss 2.0 package, stage 2 billet
NEW PRODUCT ALERT: Dynatrac EnduroSport 2.0/2.5 Suspension Systems
RANDYS Worldwide introduces Dynatrac EnduroSport suspension lift kits for Jeep JK/JL Wranglers and JT Gladiators. These dynamic kits deliver the bold off-road looks and capability you want without negatively affecting handling and ride comfort. Based on shock diameter, the EnduroSport 2.0 Suspension features 2-inch diameter shocks and the EnduroSport 2.5 Suspension features 2.5-inch diameter shocks. The suspension system produces two inches of lift and easily accommodates 35-inch tires on Sport or Sahara models, and 37-inch tires on Rubicon models or other models equipped with high fender flares. The centerpieces of the kit are the Dynatrac coil springs and EnduroSport aluminum-body shocks. Dynatrac Dual Rate Coil Springs allow for a softer initial rate for superb on-road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. It’s a win-win for you and your Jeep. EnduroSport 2.0 shocks are a monotube, high-pressure nitrogen design that features a 5/8-inch shaft, race-developed high-flow piston, and 6061-T6 aluminum construction for low weight and the highest possible heat dissipation and corrosion resistance. EnduroSport 2.5 shocks provide the increased fluid capacity and heat dissipation that keeps shock performance from fading under prolonged heavy use. These shocks feature CNC-machined aluminum top cap, rod end, and internals, a one-piece linear/digressive piston design, and a 7/8-inch diameter induction hardened, chrome plated shock shaft. The kit also includes tubular steel front upper and rear lower link arms made from CNC-machined 1026 DOM steel and welded in-house. These arms provide a major improvement over the stock units. Adjustable track bars are available as an option. To order your kit call RANDYS at (866) 928-1818, contact the RANDYS Sales Team, or shop via the button below. Shop Dynatrac EnduroSport Suspensions
RANDYS Is Carrying ICON Vehicle Dynamics Products
RANDYS is excited to carry ICON Vehicle Dynamics products for Jeeps and popular Ram, Chevy, Ford, Toyota, and Nissan vehicles. This expands the RANDYS product offerings beyond drivetrain, forging a new path in the suspension, steering, body armor, and wheel markets. ICON has a strong reputation and tons of trail cred in the off-road scene. It’s known for well-engineered and executed products designed to innovate and endure in the toughest of environments. ICON Suspension, Steering, Body Armor We will be offering complete suspension kits with up to 10 stages of off-road prowess, tubular suspension links, adjustable track bars, steering stabilizers, and numerous chassis hardware kits. Under the Body Armor banner, RANDYS will be selling a number of rugged bumper designs, skid plates, and fender fortifications. Shop ICON Suspension ICON Wheel Collection RANDYS has wheels! Finish off any build in style with ICON Alloys. Available for all popular trucks and SUVs not just Jeep-specific fitments, these quality wheels come in a variety of sizes, looks, and finishes to accommodate stock or upsized tires. Shop ICON Wheels Contact us today and get the league-leading customer service you expect from RANDYS and parts we’ve never offered before.
