New Product: ICON 2008-Up Ford Super Duty Rear Leaf Spring Expansion Pack
ICON's 2" Rear Leaf Expansion Pack provides increased suspension lift and better ride quality for lifted 2008 and newer Ford Super Duty trucks. The Expansion Pack is designed to replace and improve the center leaves of the stock leaf spring pack while retaining the factory main leaf and overload leaves. This makes the Expansion Pack both cost-effective and an easier installation as it doesn't require complete removal of the leaf spring main leaf from the spring hanger and shackle. The additional leaves included in the pack are designed to optimize ride quality and reduce axle wrap versus lift blocks. The design also shifts the overload transition point to improve small bump compliance. 168507 08-23 F250/F350 LEAF SPRING EXPANSION PACK KEY FEATURES: 2” Ford Super Duty expansion pack Less axle wrap than lift block Moves overload transition point further away for better small bump compliance More cost effective than full leaf pack Easier installation than full leaf pack Retains factory main and overload leaves TECH INFO Depending on year and block configuration installer must use the appropriate U-bolts (not included in kit) Fits single rear wheel models only Sold as single leaf spring expansion pack (2 required per vehicle) Shop 2008-up Ford Super Duty rear leaf expansion kit
New Product: Latest Products From ICON
New Products Recently Released! 2023-Up Toyota Sequoia 3" Complete Suspension Systems 2022-UP Toyota Tundra Triple Rate Real Coils Springs and Associated Complete Suspension Systems Icon Alloys is excited to announce the arrival of our latest wheel design, the Recon SLX. Icon Ford Super Duty suspension components carry over to 2023.
New Product: ICON 2022-Up Toyota Tundra Diff Drop Kit
The ICON Vehicle Dynamics Front Differential Drop Kit for the 2022-2023 Toyota Tundra lowers the front differential in order to improve CV angles at full suspension droop. Polyurethane mounting bushings replace the soft OE bushings to help limit differential movement under load. These brackets will endure the elements with their CNC laser cut steel construction with a semi-gloss black powder coat finish for corrosion resistance. 55156 22-23 TUNDRA DIFF DROP KIT KEY FEATURES: Vehicle specific design for 2022-2023 Toyota Tundra Drops front differential to provide better maximum operating angle for CV joints CNC laser cut, precision brake-formed steel bracketry with durable black powder coat finish Polyurethane bushings limit deflection and prevent differential movement under load 100% Bolt-on with no cutting or welding necessary for installation Shop 2022-up Toyota Tundra Diff Drop Kit
New Product: ICON 2017-Up Ford Super Duty Front & Rear Bumpers
ICON Vehicle Dynamics proudly introduces several new additions to our ICON Impact product line in the PRO Series front and rear bumpers for 2017 and up Ford Super Duty trucks. Like all ICON Impact products, these bumpers are designed to enhance the vehicle's looks while providing the improved protection and high clearance necessary to take the truck off-road with confidence. The ICON Impact Front Winch Bumper includes an integrated, fully-tucked winch mount, recovery points and lighting provisions. The PRO Series Rear Bumper matches the front by providing the best departure angles possible, light mounting provisions and rear corner protection. We've also developed an ACC module relocation kit for use on vehicles that came with Adaptive Cruise Control. Read on for full product information and links to everything you need to add these exciting new products to your own retail offerings. IMPACT PRO SERIES FRONT WINCH BUMPER 66200 17-UP FSD IMPACT PRO FRONT WINCH BUMPER Turn your Ford Super Duty into an off-road machine with the PRO Series Front Winch Bumper from ICON! Designed for the ultimate in off-road form and function, PRO Series features a multi-faceted, high-clearance design to help the big Ford truck negotiate tight trails. Tapered ends protect the truck's lower grille corners while allowing the front tires maximum access to grip and pull the vehicle over steep obstacles. A separate, dedicated heavy duty winch mount tray supports the winch behind the bumper, with direct mounting to the vehicle's frame. The mount places the winch low and tight to the vehicle, allowing increased airflow through the radiator without sacrificing approach angle. The winch fairlead mount is integrated into the front surface of the bumper. If you manage to get yourself into a tight spot, recovery is aided by a pair of extreme duty recovery shackle tabs, CNC machined from beefy 1" thick plate steel. Laser cut mesh panel inserts allow increased airflow through the bumper to the vehicle's cooling systems. Pro Series bumpers are manufactured from 3/16" thick plate steel, CNC laser cut and precision brake-formed for an exact fit. The PRO Series bumper looks as great as it performs, with a durable, semi-gloss black multi-stage powder coat finish. Wheel with confidence knowing that ICON Impact products are covered by ICON's Limited Lifetime Warranty. KEY FEATURES: Winch tray bolts directly to factory points for maximum strength Design provides sporty, light weight and maximum clearance on the trail Faceted, high-clearance design to maximize approach angle and off-road performance 3/16" thick plate steel construction, CNC laser cut and brake-formed Extreme duty 1" thick recovery shackle tabs are angled for high clearance Top access points on bumper allow easy access to the winch drum Replaceable 10GA Aluminum mesh allows maximum air flow to inter cooler Light bar mounts 3” cube style LED lights (sold separately) Durable satin black powder coat finish ICON Impact Series Limited Lifetime Warranty TECH INFO Requires additional relocation bracket on vehicles equipped with Adaptive Cruise Control (ACC) ICON Part # 66202 (sold separately) Fairlead sold separately Recovery shackle tabs CNC machined from 1” thick steel plate, for 3/4” shackle pin (5/8” shackle) Lighting accessories not included. Light mount is compatible with common 3x3” cube LED lights shop 2017-up ford super duty impact pro front winch bumper ACC RELOCATION BRACKET 66202 17-UP FSD ACC RELOCATION KIT For those running vehicles equipped with Adaptive Cruise Control (ACC), this bracket relocates the ACC radar module so it won't be blocked by the winch and bumper, allowing it to remain fully functional. The ACC is relocated to just behind the grille on the driver's side, where its signals can still pass through the plastic material of the grille. This bracket may be used with any aftermarket bumper that blocks the stock ACC location. KEY FEATURES: Relocates ACC module behind the grill for 2017-Up Ford Super Duty trucks equipped with ACC Adjustable aim for lifted trucks 3mm aluminum plate construction, CNC laser cut, precision brake-formed Durable textured black powder coat finish ICON Impact Series Limited Lifetime Warranty IMPACT PRO SERIES REAR BUMPER 66201 17-UP FSD IMPACT REAR BUMPER Outfit your Super Duty to tackle off-road trails with the ICON Impact Pro Series rear bumper. Designed for the ultimate in off-road form and function, Pro Series features a multi-faceted, high-clearance design for slipping past the tightest obstacles on the trail. This bumper is designed with the smallest form factor possible, ensuring great ground clearance and departure angles. The bumper also includes provisions to mount a pair of flush-mounted 2" LED back-up lights (not included). And you can keep your factory backup proximity sensors, as the bumper comes with mounting provisions to reinstall them. The bumper is designed to work with the factory tow hitch. Pro Series bumpers are manufactured from 3/16" thick plate steel, CNC laser cut and precision brake-formed for an exact fit. The PRO Series bumper looks as great as it performs, with a durable, semi-gloss black multi-stage powder coat finish. Wheel with confidence knowing that ICON Impact products are covered by ICON's Limited Lifetime Warranty. KEY FEATURES: Bolts directly to factory points for maximum strength Design provides light weight and maximum clearance on the trail Faceted, high-clearance design to maximize approach angle and off-road performance Integrated sensor cutout with universal sensor bezel retains OE sensors Vehicles without factory equipped sensors can plug the bezel with provided cap Works with factory hitch 3/16" thick plate steel construction, CNC laser cut and brake-formed Integrated light pockets accommodate two 3” flush mount LED lights Durable satin black powder coat finish ICON Impact Series Limited Lifetime Warranty TECH INFO Lighting accessories not included. Light pockets are compatible with common 3x3” cube LED lights Shop 2017-up ford super duty impact rear bumper
New Product: ICON 2005-22 Ford Super Duty Centerline™ 2.5 Steering Stabilizer
ICON Vehicle Dynamics is proud to introduce our 2.5 Centerline™ Steering Stabilizer with Piggyback Reservoir for Ford Super Duty pickups. The ICON Centerline™ Steering Stabilizer features a through-shaft design to eliminate the push/pull sensation associated with traditional steering stabilizers, resulting in more consistent damping and symmetrical steering feel throughout the input range. The large 2.5-inch diameter stabilizer body and piggyback reservoir increases fluid volume to prevent performance fade due to heat and cavitation. This unit provides a significant increase in steering damping compared to the stock equipment, for an improved driving experience with both stock size and oversize aftermarket wheels and tires. The kit also allows for increased steering travel compared to other aftermarket steering stabilizers. The stabilizer body shares components with ICON's proven 2.5 Series shock absorbers, meaning the unit is fully rebuildable. 2.5 Series features a 6061 hard anodized aluminum shock body for excellent corrosion resistance and a beefy 7/8” chrome plated induction-hardened steel shaft.. FK Rod End bearings provide precise function & feel throughout steering range. A piggyback reservoir provides increased fluid capacity for better heat dissipation under hard use. Installation is 100% bolt-on using common hand tools and should be an easy job for both professional mechanics and experienced DIY'ers. 65052 05-22 FSD 2.5 PB CENTERLINE STABILIZER KIT KEY FEATURES: Large bore 2.5" diameter shock body with piggyback reservoir Through shaft design eliminates the push/pull sensation associated with traditional stabilizers Provides symmetrical steering feel throughout input range Drastically increased steering damping over stock unit 100% bolt-on installation Offers increased wheel travel compared to ICON's dual steering stabilizer kit Fully rebuildable ICON Vehicle Dynamics 2.5 Series shock 6061 hard anodized aluminum shock body provides excellent corrosion resistance 7/8” chrome plated induction-hardened steel shaft 5WT shock oil for consistent suspension damping along a wide temperature range FK Rod End bearings for precise function & feel throughout steering range TECH INFO After installation, cycle steering left and right to ensure full range of steering is achievable and stabilizer is installed correctly. Use ICON 61112 1” front bump stop spacers unless the suspension system that you are using calls for larger bump stop spacers. If using a non-ICON configuration, cycle the suspension to verify that the stabilizer does not make contact upon full compression. Mounts over stock front differential cover, not compatible with most aftermarket covers. Not compatible with aftermarket tie rods. Shop Ford Super Duty centerline steering stabilizer
