TS/JL
They're Here:
Jeep Wrangler JL Parts and Gladiator JT Gears
NOW AVAILABLE: Yukon performance parts for Jeep JL. Plus, new gears for the hot 2020 Jeep Gladiator JT!
#RANDYSWorldwide #YukonGearandAxle
Available JL Gear Ratios: | 3.45 | 3.73 | 4.11 | 4.56 | 4.88 | 5.13 | 5.38 |
Yukon JL parts fit Dana 30 or Dana 44 Fronts and Dana 35 or Dana 44 Rears. These Ring & Pinions are designed for easier installation through enhanced quality engineering. Yukon Gears get you unmatched torque load capacity and offer quiet operation and simple setup. Gain confidence knowing your bearings are held to Timken’s fitting best practices and won’t slip or crack under pressure.
Yukon Gears are held to rigorous quality and engineering standards with in-house QA Lab testing and Gleason CAGE design software so you get the best product available on the market.
Yukon Performance Driveshaft for Jeep Wrangler JL
OE Replacement JL Driveshafts:
Yukon OE Replacement Driveshafts are made with high strength, serviceable 1310 U-Joints, unlike a stock model CV head. The system is designed to work for stock height to 2.5” lift and 33" tires. Yukon Driveshafts include replacement transfer case yokes.
Heavy Duty 1310 JL Driveshafts:
Upgrade the driveshaft with heavy duty 1350 Universal Joints! Added strength in the Driveshaft allows for a 4.5" suspension lift and 35" tires. Yukon Driveshafts included a transfer case Yoke, 1310 u-bolts, 1310, u-joints, 2"x.120" tubing and grade 8 hardware.
Heavy Duty 1350 JL Driveshafts:
Yukon's top of the line, toughest you can get, heavy duty 1350 Universal Joints get the most out of your ride. Yukon high strength 1350 Driveshafts allow for a 4.5" suspension lift and up to 37" tires. Yukon Driveshafts include a new transfer case yoke for the OE flange.
Heavy Duty 1410 Driveshafts:
Yukon's 1410 Super Heavy Duty Driveshafts offers fully splined 1.5" stub, solid 1410 u-joints, and beefy 2.125"x.188 tubing. Each driveshaft is custom built to your vehicle specifications. Call one of our drivetrain experts to order yours today.
Yukon Master Overhaul Kit for Jeep Wrangler JL
Yukon Gear & Axle offers the most complete Master Overhaul Kits available in the industry. Thoughtfully engineered shim stacks and super shims allow for precise adjustments for exacting tolerances. Premium grade fasteners and high quality Yukon Mighty Seals are included in most kits.
Each kit uses Timken bearings and races along with high-quality seals and parts. Kit components Include carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), thread locking compound, marking compound with brush, and gasket.
Yukon Ring & Pinions for Jeep Gladiator JT
That's right! Yukon is as ready as you are for the all new Jeep truck to hit the road. Yukon Gear now offers our legendary Ring & Pinions in a variety of ratios for the 2020 Gladiator. Plan your lift and tire upgrade with the appropriate gear ratio from Yukon Gear & Axle.
Yukon Gears get you unmatched torque load capacity and are as quiet as possible through their precisely engineered transverse contact ratio. Gain confidence knowing your bearings are held to Timken’s fitting best practices and won’t slip or crack under pressure. Yukon Gears are held to rigorous quality and engineering standards with in-house QA Lab testing and Gleason CAGE design software so you get the best product available on the market.
Available Now: Yukon Performance Axles and Hardcore Differential Covers for Jeep Wrangler JL
Yukon Rear Axles
Yukon's High-strength 1541H steel axles include heat treated bearing journals for longer life and less wear c-clip wear. Yukon's smooth and precise bearing journals are the secret to maximizing bearing and seal life, thanks to the unique surface finishing treatment. Say goodbye to excessive end-float with Yukon’s precision controlled c-clip buttons that provide proper fit every time.
Yukon Front Axles
Next-level strength and toughness from 100% 4340 Steel that undergoes Yukon’s stringent proprietary heat treatment process and in-house torque testing. The yoke-end has a tight tolerance, which is the key to a properly fitted u-joint that won’t vibrate or loosen. Smooth and precise bearing journals are the secret to maximizing bearing and seal life, thanks to Yukon’s unique surface finishing treatment.
Yukon Hardcore Diff Covers
Yukon Hardcore Differential Covers are made with thick-walled high strength nodular steel to fend off the most extreme impacts in off-road driving. Yukon Hardcore Diff Covers are designed to protect lockers, gears and axles from extreme impact. These covers come with a durable powder coat finish, magnetic drain plug, quality gasket and high strength steel fasteners for easy bolt-on installation.
Share Article:
No comments yet. Be the first to add comment!
Leave a comment
Your email address will not be published. Required fields are marked with *
